A MHz X-ray diffraction set-up for dynamic compression experiments in the diamond anvil cell.

An experimental platform for dynamic diamond anvil cell (dDAC) research has been developed at the High Energy Density (HED) Instrument at the European X-ray Free Electron Laser (European XFEL). Advantage was taken of the high repetition rate of the European XFEL (up to 4.5 MHz) to collect pulse-resolved MHz X-ray diffraction data from samples as they are dynamically compressed at intermediate strain rates (≤103 s-1), where up to 352 diffraction images can be collected from a single pulse train. The set-up employs piezo-driven dDACs capable of compressing samples in ≥340 µs, compatible with the maximum length of the pulse train (550 µs). Results from rapid compression experiments on a wide range of sample systems with different X-ray scattering powers are presented. A maximum compression rate of 87 TPa s-1 was observed during the fast compression of Au, while a strain rate of ∼1100 s-1 was achieved during the rapid compression of N2 at 23 TPa s-1.

Towards a dynamic compression facility at the ESRF.

Results of the 2018 commissioning and experimental campaigns of the new High Power Laser Facility on the Energy-dispersive X-ray Absorption Spectroscopy (ED-XAS) beamline ID24 at the ESRF are presented. The front-end of the future laser, delivering 15 J in 10 ns, was interfaced to the beamline. Laser-driven dynamic compression experiments were performed on iron oxides, iron alloys and bismuth probed by online time-resolved XAS.

X-ray Free Electron Laser-Induced Synthesis of ε-Iron Nitride at High Pressures.

The ultrafast synthesis of ε-Fe3N1+x in a diamond-anvil cell (DAC) from Fe and N2 under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by in situ transformation of α- to γ-iron. Ultimately, the Fe and N2 reacted uniformly throughout the beam path to form Fe3N1.33, as deduced from its established equation of state (EOS). We thus demonstrate that the activation energy provided by intense X-ray exposures in an XFEL can be coupled with the source time structure to enable exploration of the time-dependence of reactions under high-pressure conditions.

Synthesis of lithium polyhydrides above 130 GPa at 300 K.

The prediction of novel lithium hydrides with nontraditional stoichiometries at high pressure has been seminal for highlighting a promising line of research on hydrogen-dense materials. Here, we report the evidences of the disproportionation of LiH above 130 GPa to form lithium hydrides containing H2 units. Measurements have been performed using the nonperturbing technique of synchrotron infrared absorption. The observed vibron frequencies match the predictions for LiH2 and LiH6. These polyhydrides remain insulating up to 215 GPa. A disproportionation mechanism based on the diffusion of lithium into the diamond anvil and a stratification of the sample into LiH6/LiH2/LiH layers is proposed. Polyhydrides containing an H2 sublattice do exist and could be ubiquitously stable at high pressure.

New iron hydrides under high pressure.

The Fe-H system has been investigated by combined x-ray diffraction studies and total energy calculations at pressures up to 136 GPa. The experiments involve laser annealing of hydrogen-embedded iron in a diamond anvil cell. Two new FeHx compounds, with x∼2 and x=3, are discovered at 67 and 86 GPa, respectively. Their crystal structures are identified (unit cell and Fe positional parameters from x-ray diffraction, H positional parameters from ab initio calculations) as tetragonal with space group I4/mmm for FeH(∼2) and as simple cubic with space group Pm3m for FeH3. Large metastability regimes are observed that allowed to measure the P(V) equation of state at room temperature of FeH, FeH(∼2), and FeH3.